User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 14
©2014 XPROHELI. All Rights Reserved.
With clamps loose, adjust angle of legs so top plate of Silk stand is
level and left and right legs are even distance apart. Line up the
rear of the legs with the cross brace to help align.
Insert ends of cross brace clamps onto left/right legs. Make sure
legs and stand symmetry are even and then tighten end cross
brace clamp in place (2.5mm hex).
You can now tighten the left/right leg tube clamps to the upper silk
stand (7/64” hex). The stand is now assembled and ready to use.
Yours should look like this:
