User Manual
XProHeli Silk Gimbal
Silk Gimbal
Page 21
©2014 XPROHELI. All Rights Reserved.
Adjust Pan Balance
To adjust the pan axis you will need to slightly loosen the 2 clamps
at the bottom of the pan axis motor. The pan axis adjustment is
made by sliding the top carbon fiber tube front/back and by
rotating it to the left or right.
Adjust the pan axis similar to the roll and pitch axis by holding up
the top pan axis plate at a 90 degree angle. If the pan axis is
weighted to far to the left or right side or weighted to far forward or
too far back it will fall to the weighted side. Adjust this by sliding the
tube inward or outward for front to back balance and rotating the
tube left to right for side to side balance. A perfectly balance pan
axis will hold position by its self in all 360 degrees of motion.
ADJUST PAN BALANCE
Front/Back
Slightly Loosen upper
clamps to adjust pan
axis
