XPower Easy Max, Инструкция по эксплуатации

Страница: 35 / 52

- 35 -
4. Instructions for installation and use
4.3 use
4.3.2 operating steps
4.3.1 before use
1. Check that the input current and that the environment in which the inverter is installed are compatible with the use conditions.
2. check that the pressure sensor is connected to the system.
3. ensure that all connections are fully tightened.
4. if the pump is operating without water after all connections have been performed and the pump is three-phase, check that the
motor rotation direction is correct. If the motor rotates in reverse, change the connections of terminals UV, WF or WU or reverse it
with the specific switch.
1. When connecting the current, the start-up indicator will turn on and the pressure display will show 00.00 Bar.
2. Open the delivery valves and press the button and start the pump
3. you may press at any time to stop the pump
4. Press or to set the operating pressure.
Press to increase the set temperature to decrease it.
5. open the cock after adjusting the pressure and the inverter will adjust pump speed based on the water use.
If the pump operates normally and the pressure indicated on the display is constant, installation is complete.
GB