https://www.XPOtool.com
Item 63021
Page 12
The Tool Experts
05 2022-1
Troubleshooting
Problem
Possible cause
Proposed solution
Pilot flame does not ignite.
Gas valve closed
Open gas valve.
Fuel used up
Refill fuel.
Opening clogged
Clean or replace opening.
Air in the gas hose system
et air out of the lines.
ose connections
Re-tighten connections.
Pilot flame does not stay on.
Deposits on pilot flame
Clean contaminated areas.
ose connections
Re-tighten connections.
Defective heat sensor
Replace heat sensor.
eaking gas line
Check connections.
Insufficient fuel pressure
Container almost empty; refill.
Burner does not light.
Insufficient fuel pressure
Container almost empty; refill or
replace.
Opening clogged
Clean or replace opening.
Control not on.
Turn valve to On.
Defective heat sensor
Replace heat sensor.
Pilot light unit bent
Properly place pilot light unit.
Not in correct location
Position properly and retry.
If the device shows any errors during assembly or use, do not try to modify it, but contact the seller.
