https://www.XPOtool.com
Item 63021
Page 11
The Tool Experts
05 2022-1
Step
3:
Put the gas cylinder housing
(1)
over the post from
above and place it on the stand.
Step
4:
1. Remove the 4
bolts
(1)
from the burner.
2. Push the gas hose through the post from above.
3. Fix the burner unit to the post by the 4
bolts.
Step
5:
1. Check if the connection of the post and burner
are assembled according to instructions, and all
bolts and nuts are tightened.
2. Put 6
large flat washers on the 3
reflector spac-
ers
(1).
Step
6:
Fasten the reflector
(2)
with 3
large flat washers
and 3
wing nuts
(1).
Step
7:
1. ift the gas cylinder housing and place it on the
post bracket.
2. Connect the end thread of the inlet gas hose to
the pressure reducing valve.
3. Connect the pressure reducing valve
(2)
to the
gas container
(1)
and tighten with an adjustable
wrench.
4. Place the liquid gas container on the stand.
5. Fasten the gas cylinder with the strap.
