![background image](http://html1.mh-extra.com/html/reece/kado-lussi-series/kado-lussi-series_installation-instructions_1430850001.webp)
Page 1 of 3
Installation instructions
Kado Lussi Heated Towel Rail Hardwired Wall Mount
1030 x 500mm Chrome
HYDROTHERM
MILAN HEATED WALL MOUNT TOWEL RAILS
page 3 of 5
PLUG IN VERSION
DOUBLE HARD-WIRED VERSION
HARD-WIRED VERSION
Hard wire
attachment
(FIG.1)
(FIG.2)
PLUG IN OPTION - REQUEST ONLY
(See Fig. 2)
Plug is supplied with element cable (1200mm long).
Cable may be cut and plug attached to required length.
(See Fig 2)
This option is only available by request.
50mm
70mm
HARD-WIRE ATTACHMENT
LL
AW
Cord
All Hydrotherm Elements carry the following approvals.
Elements have a built in thermostat and internal cut out ensuring
safety and energy efficiency.
All
Kado Lussi
electric elements can be supplied as 240v or 110v
All electric elements are replaceable and can be easily
changed over.
®
IP55
(FIG.2)
WIRING OPTIONS
The
Kado Lussi W
all Mount Series Electric Towel Rails
come pre
filled with water, and with electric elements already
fitted
(standard on the left unless otherwise specified)
HARD WIRED - STANDARD OPTION
(See Fig.1 )
The cable may be hard-wired into the wall with an
element attachment. This attachement must be installed
by a qualified electrician.
Two attachments are provided for both the cable side, and non-cable side
so to allow for a symmetrical apperance (see Fig.1).
All hard-wired elements achieve an IPX Rating of IP55.
(IPX5) for use in wet areas.
We
recommend all electric towel rails be
connected
to a timer for convenience, as well as to prolong the life
of the replaceable electric element.