Xpeed 320R, Руководство пользователя

Страница: 78 / 111

Sample Application How to Set It Up
78 Xpeed Networks, Inc.
c) For port enter
w0
for WAN interface
d) For LMI enter setting provided by your ISP
e) For Termination select
NT
5. Change the DSL parameters.
a) Type
Modify
b) Select the number for
DSLCONFIG
c) For port enter w0
d) For Link Speed select the setting provided by your ISP
e) For Serial Swapped select the setting provided by your ISP
f) For Stream Inverted select the setting provided by your ISP
6. Configure the IP addresses of your WAN port.
a) Type
Modify
b) Select the number for
Interface
c) For DHCP Client select
Off
d) For Enable select
Yes
e) For Framing Type select the setting provided by your ISP
f) For Gateway use the address provided by your ISP
g) For IP Address use the address provided by your ISP
h) For Netmask use the address provided by your ISP)
7. The final configuration is to set the Network Address Translation (NAT)
rule. First check that there are no NAT rules set.
a) Type
show
b) Select the number for
NAT
c) Type
rules
d) Type
all