Xpeed 320R, Руководство пользователя, Страница: 83 / 111

Trouble Shooting
X320R User’s Guide 83
• While trying to access the X320R using the web interface, I have entered the
correct IP address but nothing happens.
First check that the X320R is correctly connected to the LAN.
Then verify that the X320R and the PC, from which you are running your web
browser, are on the same subnet. For example, the X320R has a default IP address
of 192.168.1.1 and a subnet mask of 255.255.255.0. Your PC must have an
address in the 192.168.1.X range, where X is a number between 2 and 254 (0, 1,
and 255 are typically reserved addresses).
• I added a new hub to one of the Ethernet ports on the X320R. The link light
does not come on.
To connect the X320R, which has an integrated hub, to another hub you have to
do one of the following:
• Use a cross-over cable between the two hubs.
• Use a straight-thru cable, where one hub has an uplink switch enabled.
Some hubs may instead have a special port (usually port 1) reserved for uplink.
• I added a IP filter rule, but it is not working.
Rules are executed in first-come-first-served fashion. For example, if Rule #1
blocks traffic to PC#2, and Rule#2 passes traffic to PC#2, then Rule #1 will have
priority and traffic to PC#2 will be blocked.
• How do I contact technical support?
If you are having trouble connecting to your DSL service, you must contact your
ISP. If you are having physical trouble with your X320R router, please contact
Xpeed Technical Support at 408-383-3810 or support@xpeed.com.
You may also browse the Xpeed support web-site: www.xpeed.com/support.