Xpeed 320R, Руководство пользователя

Страница: 19 / 111

19
Chapter 3
Setting up the X320R
Once you have all the information that you will need, you can follow the steps
below to begin the installation and setup of the X320R.
1. H
ARDWARE
S
ETUP
1. Locate a secure spot for your X320R router so people do not trip
over it loosening any cables. It should be located as close as pos-
sible to the DSL jack to reduce possible interference. Note: you
may use the holes on the bottom of the X320R to mount it on a
wall.
2. Plug the wall transformer to a 110 VAC socket. Then power the
X320R by connecting the wall transformer to the 9VDC jack on
the back of the X320R. You should immediately see the power
LED turn on.
3. Connect the SDSL Line to the DSL port on the back of the X320R.
You should see the Link LED start to blink and eventually light
solid green. If this LED does not turn solid after 5 minutes,
please check to make sure your connectors are properly seated.