www.xmarto.com
43
WiFi setting, you’ll see below interface.
Tips:
⚫
Change the hotspot name or the password will cause losing connection with cameras; please
restore to factory settings if you lose camera connections; or follow 4.3.2 to add cameras to the
NVR.
⚫
If you plan to install two systems in the same room, you can try to change the WiFi chancel to
avoid interference.
⚫
On right of WiFi setting interface, the rate indicates cameras’ connection strength. If rate is above
30, it’s considered to be good connection, while if rate is under 25, it’s considered to be weak
connection.
5.6.7 PTZ Setting
5.6.7.1 PTZ Parameter Setting
Prerequisites:
Before trying to control the speed dome or PTZ, you need to make sure that the decoder of this PTZ
has already connected to NVR, and you need to set the parameters for the PTZ in NVR.
Operation Steps:
1)
Right click the mouse to pop out NVR main menu, then click System setting – CH Setting – PTZ
setting, you’ll see below interface, as shown in below image.
