www.xmarto.com
22
·
Before power on the NVR, please connect the NVR to a monitor or TV using VGA or HDMI
cable.
Steps of startup the system:
1. Connect NVR to a standalone monitor/TV via VGA or HDMI. (Laptop cannot be used as a
monitor.)
2. Plug NVR to power using included 12V 3A DC power adapter, you’ll hear a beep
and the power indicator light on NVR front panel will light up.
3. If monitor is getting video output from NVR, you should see the starting page with
xmartO logo. If not, please check connection.
NOTE:
If you cannot get any display on TV, you have resolution incompatibility
issue. The NVR’s default resolution is 1280 x 1024, which does not work with some
of screens. You need another screen to display cameras, or change NVR’s resolution
online to match with your current screen.
Here is how to change NVR resolution online:
http://www.xmarto.com/helpcenter/?/article/10
5.3.2 Logout
If you want to log out while using the system, right click your NVR mouse to pop out NVR main
menu, then click “Exit System”, and choose “Logout”.
If you want the system to auto logout, please go to “System setting” – “General setting”, enable the
“Auto Logout”, click “Apply” to save this setting. System will auto logout if there is no operation
within 1 minute. Username and password will be required for next login.
