www.xmarto.com
37
Tips:
⚫
The mounting type option only works for panoramic cameras.
⚫
It supports panoramic cameras that support N1 protocol.
5.6 Network Setting
5.6.1 Network Setting
Declaration:
To remote access your cameras from computer and smartphone, you need to connect the
NVR’s WAN port to your router’s LAN port with a network cable. After doing this, your NVR will get
online. Only when the NVR is online, you can remote access your cameras.
Default NVR IP address: 192.168.1.114
Operation Steps:
1)
Connect the NVR’s WAN port to your router’s LAN port with a network cable.
2)
Right click the mouse to pop out NVR main menu, then click System setting – Network setting,
you’ll see below interface.
