www.xmarto.com
23
5.3.3 Reboot
If you want to reboot the system while using it, right click your NVR mouse to pop out NVR main
menu, then click “Exit System”, and choose “Reboot”. System will reboot immediately.
5.3.4 Close screen display
If you want to close the screen display while using it, please right click your NVR mouse to pop out
NVR main menu, then click “Exit System”, and choose “Close screen display”. System will stop
displaying camera videos on screen. Double click the left button of your mouse will get it back.
5.3.5 Shutdown
If you want to shut down the system, please right click your NVR mouse to pop out NVR main menu,
then click “Exit System”, and choose “Shutdown”. System will release power and pop out message
“Now you can power off the device”. Unplug your NVR from power, and the system will shut down
completely.
5.4 Device Manage
Manage your cameras’ connections with the NVR. In Device Manage interface, you can add new
cameras to NVR, re-pair cameras that lost connection to NVR again, delete cameras from their current
channels and re-pair.
5.4.1 Add Device (Pair Camera to NVR)
Pair new add-on camera to NVR, repair lost camera to NVR, pair camera to work wired when they are
installed out of NVR’s WiFi range….
5.4.1.1 Add new camera to NVR (Match Code)
Function:
Pair the camera to NVR to work wirelessly.
The main function of “Match Code” is to pair the IP cameras to NVR, transmit NVR’s WiFi hotpot
and password to IP cameras, thus IP cameras connect to NVR automatically and transmit the video
signals to NVR wirelessly.
Applies to the situations that add new add-on camera to your system, replace old camera in your
system, and repair lost camera to NVR.
