04
Safety Guidelines
- Do not open (or modify in any way) the
Unit or its AC adaptor.
- Do not attempt to repair the unit, or to
replace parts within it (except when this
manual provides specific instructions
directing you on how to do so).
Refer all servicing to your retailer, the
nearest XM eDrum Service Center, or an
authorized XM eDrum distributor.
- Never install the unit in any of the
following locations:
‧
Areas subject to temperature extremes
(E.G. direct sunlight in an enclosed
vehicle, near a heating duct, on top of
heat-generating equipment)
‧
Damp areas
(E.G. baths, washrooms, on wet floors)
‧
Areas exposed to steam or smoke
‧
Locations subject to salt exposure
‧
Humid areas
‧
Locations exposed to rain
‧
Dusty or sandy areas
‧
Locations subject to high levels of
vibration and/or shaking.
- When using the unit with a stand
recommended by XM eDrum, the stand
must be carefully placed so it is level and
will remain stable.
If not using a stand, you still need to make
sure any location you choose to place the
unit provides a level surface to support the
module properly and keep it from being
unstable.
- Be sure to only use the AC adaptor supplied
with the unit.
Also, make sure the line voltage at the
installation matches the input voltage
specified on the AC adaptor’s body.
Other AC adaptors may use a different
polarity, or be designed for a different
voltage, so their use could result in
damage, malfunction, or electric shock.
- Only use the attached power supply cord.
Also, the supplied power cord must not be
used in conjunction with any other device.
WARNING
ALWAYS OBSERVE THE FOLLOWING
