Xinje DS3 series servo, Руководство пользователя

Страница: 114 / 120

108
connection
error
reverse over range
signal
2. motor run reverse
and encounter the
forward over range
signal
terminal distribution
2 E-262
Control stop
over time
1. inertia too big
2. stop overtime too
short
3. brake torque too
small
1. decrease the inertia or use
motor with brake
2. increase stop overtime
P0-30
3. increase brake torque P3-32
28 0 E-280
Vibration too
serious
Motor vibration too
serious
Decrease servo position loop
or speed loop gain, check the
motor shaft connection
30 0 E-300
Motion bus
lose
synchronizati
on
Motion bus
communication error
Check the motion bus
connection
31
0 E-310
Motor code
error
Motor code error Set the correct motor code
1 E-311
Motor code
lost
Motor code not set Set motor code in P0-33
9. General debug steps
(A) Before power on, check the product according to the inspection of the goods described in
the manual to confirm that the equipment is not obviously damaged.
(B) In the absence of obvious damage, connect the servo drive and servo motor, and