4 Installation
XILS-Lab offers you the choice of using an eLicenser, or an iLok.
4.1 eLicenser drivers
The
XILS 4
uses an eLicenser dongle. You must have this dongle connected to a USB port on your
computer to make the
XILS 4
work.
Important
: Please take care of your dongle. You need it to run the
XILS 4,
as it carries your license!
Please Note
: Even if you have already installed the eLicenser drivers for a previous product, please install the
latest version of the eLicenser License Control.
To download the latest eLicenser Control Center (eLC), please go to:
http://www.elicenser.net/en/latest_downloads.html
You will need a XILS 4 Activation Code, to load your license onto the dongle:
First, plug your dongle into a USB port of your computer, then launch the License Control Center. Launch the
Enter authorization code
. Enter your
Activation Code
in the reserved field, and press Next.
Wait for the license to be downloaded, and then check to see if the license is correctly loaded on to the dongle,
in the main section of the License Control Center.
4.2 iLok drivers
To use the iLok version of the
XILS 4
, you need to plug an iLok USB key into your computer.
After downloading and installing the latest PACE drivers, please login into your ilok.com account, to
download your
XILS 4
license on to your iLok USB key. You may need to redeem the license, using the
license code you received. Follow the “redeem license code” link in your ilok.com account)
To download the latest PACE drivers, please go to:
http://www.ilok.com/download-ilok-software.html
4.3 Windows (Windows 7,8,10,11)
To install the XILS 4 on Windows 7 and later, launch the XILS 4 installer file.
Please download the latest version from the XILS-lab website.
http://www.xils-lab.com/pages/XILS 4_Download-Installer.html
Once you have accepted the license agreement, you will be asked to select the components to be installed :
