The settings of the pitch tracker’s frequency range must be adjusted according to the input signal. It affects the
pitch tracker’s tessitura (the range from lowest to highest note expected) and tracking responsiveness. The
broader the tessitura, the less precise the detection will be.
Adjust these two settings according to your input signal. As you adjust them, you can see the notes
corresponding to the lowest and highest frequencies.
LVL OUT:
Sets the level of this control signal.
12.5.4
Input Gate
This module is applied to the two effect inputs, when the
XILS 4
is used as an effect processor.
ATTACK
: This knob sets the duration the gate will take to open.
RELEASE
: This knob sets the time the gate will take to close.
OPENING THRESHOLD
: This knob sets the opening threshold of the gate. The external input signal must
be at or over this level, to open the gate.
CLOSING THRESHOLD
: This knob sets the closing threshold of the gate. The external input signal must
below this level to close the gate.
GATE LEVEL
: This knob sets the level for opening or closing the gate.
12.6 Effects modules
