12.2.2
Tempo synced LFO
To avoid having to use the third oscillator as a low frequency modulator, we added an independent LFO.
RATE
: Sets the frequency of the LFO.
SYNC
: When engaged, this switch synchronizes the
frequency to a multiple or sub-multiple of the DAW
tempo.
WIDTH
: Sets the width of the waveform.
LEVEL
: Sets the output level of the LFO.
TYPE
: Sets the waveform type of the LFO.
DELAY
: Sets the delay offset between the gate and
the beginning of the modulation.
FADE
: Sets the ramp rate of the modulation rise
after the Delay.
Notice
: DELAY and FADE work only when a Gate
(Keyboard or Sequencer) is connected to the LFO.
12.2.3
Sample and Hold
This very useful module allows the sampling of its input, and holds it over until it receives the next clock.
If no input is selected, then a white noise is used instead. The Input and Output must be connected in the
advanced matrix, by using the drop-down menus.
