12.1.7
Output filter
There is a static filter, which can be set to either low pass or high pass, for each of the two outputs, left
and right. This filter can be useful for limiting some high frequencies, or removing rumble, while
maintaining an otherwise full range for the dynamic filter.
The two knobs set the cut-off frequency of the filters
and the switch selects the type; high-pass or low-
pass.
When the switch is set to the centre, no filter is
activated.
12.1.8
Input Level
The
XILS 4
can also be used as a versatile audio
effect processor.
In this case, the Audio Input of the plugin is directed
into the Main matrix, and the level can be adjusted
with these two knobs.
In the
XILS 4
, only the left synthesizer is connected
to the Audio inputs of the plug-in.
The right synthesizer inputs are connected to the
output of the left synthesizer. In this way, you can
use any modules of the left synthesizer inside the
right one.
