manualshive.com logo in svg

Xilinx T1, Руководство по установке

Поделиться
Скачать
Xilinx T1 Скачать руководство пользователя страница 44

EMC Compliance

Class A Products

The following standards apply:

• FCC Part 15 – Radiated & Conducted Emissions (USA)

• CISPR 32 – Radiated & Conducted Emissions (International)

• VCCI (Class A)– Radiated & Conducted Emissions (Japan)

Regulatory Compliance Markings

When required, these products are provided with the following product certification markings:

• VCCI marking

FCC Class A User Information

The Class A products listed above comply with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

CAUTION! This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at their own expense.

CAUTION! If the device is changed or modified without permission from Xilinx, the user may void
their authority to operate the equipment.

Appendix B: Regulatory Compliance Statements

UG1518 (v1.0) December 17, 2021

 

www.xilinx.com

T1 Telco Accelerator Card Installation Guide

 44

Send Feedback

Содержание T1

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды