Figure 6:
I2S Transmitter Configuration Tab
Field Descriptions
• Component Name : The base name of the output files generated for the core. Names must
begin with a letter and can be composed of any of the following characters: a- z, 0 to 9, and
"_".
• Audio Channels : Specify the number of Audio Channels. Allowed values are 2, 4, 6 and 8.
• I2S Data Width : Specify the I2S data width. Allowed values are 16 and 24.
• FIFO Depth : Specify the depth of the FIFO. Allowed values are 64, 128, 256, 512 and 1024.
In case of I2S Transmitter, the data is output on I2S interface only after the FIFO if half filled.
• Enable FIFO Data Count: Select this option to enable the IP to output the FIFO Read data
count.
Chapter 5: Design Flow Steps
PG308 (v1.0) April 4, 2018
www.xilinx.com
[placeholder text]
I2S Transmitter and I2S Receiver
29
Send Feedback