Printing
WorkCentre 7220/7225 Multifunction Printer
87
User Guide
10.
Select another tab or click
OK
.
11.
To send the job to the printer, in the Print window, select the number of copies to print, then click
OK
or
.
Releasing a Secure Print
1.
At the control panel, press the
Job Status
button.
2.
Touch the
Secure Print Jobs
or
My Secure Jobs
tab.
3.
Touch the folder that holds the print job.
4.
Using the keypad, enter the passcode that you assigned to the print job, then touch
OK
.
5.
Touch the corresponding print job in the list, then touch
Release
.
Deleting a Secure Print
1.
At the control panel, press the
Job Status
button.
2.
Touch the
Secure Print Jobs
or
My Secure Jobs
tab.
3.
Touch the folder that holds the print job.
4.
Enter the passcode number that you assigned to the print job using the keypad.
5.
Touch the corresponding print job in the list, then touch
Delete
.
Sample Set
The Sample Set job type allows you to print a sample copy of a multiple-copy job and hold the
remaining copies at the printer. After you review the sample copy, you can select the job name from the
printer control panel to print the additional copies.
Sending a Sample Set Print Job
1.
On the Printing Options tab, from the Job Type list, select
Sample Set
.
2.
Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
Note:
To select the paper for your print job, click
Paper
>
Select By Tray
.
3.
Select an option for 2-sided printing.
4.
If your printer has a finisher installed, click the arrow to the right of Finishing, then select a stapling
option. The image next to Stapling shows the staple position.
5.
Select a print-quality mode.
6.
Select an output destination.
7.
Select another tab or click
OK
.
8.
To send the job to the printer, in the Print window, select the number of copies to print, then click
OK
or
.
A sample copy prints immediately. The sample copy is not counted as part of the print job.
