Security
54
Xerox
®
WorkCentre
®
4265 Multifunction Printer
System Administrator Guide
Configuring Authentication Server Settings for LDAP
The printer uses the primary LDAP server for authentication, authorization, and personalization. The
primary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Server page
in CentreWare Internet Services. If you already have configured LDAP server settings, the printer uses
this server automatically when you select LDAP as the network authentication or authorization method.
The printer only uses alternate LDAP servers for authorization and personalization when primary LDAP
server communication fails.
1.
In CentreWare Internet Services, click
Properties
>
Login/Permissions/Accounting
.
2.
Click
Login Methods
.
3.
For Authentication Server, click the Pencil icon.
4.
For Authentication Protocol, select
LDAP
.
5.
To configure the LDAP Server, click the Pencil icon.
6.
Click
Save
.
Configuring Convenience Authentication Settings
When Convenience Authentication is enabled, users swipe a pre-programmed identification card
through a proximity card reader at the control panel. To use this method, purchase and install a USB
card reader and an authentication server that supports the Xerox
®
Convenience Authentication API.
To configure access rights using Convenience Authentication:
1.
In CentreWare Internet Services, click
Properties
>
Login/Permissions/Accounting
.
2.
Click
Login Methods
.
3.
To require users to swipe a pre-programmed identification card through a proximity card reader at
the control panel, select
Convenience
. To use Convenience login, purchase and install a USB card
reader and an authentication server that supports the Xerox
®
Convenience Authentication API.
4.
To allow an alternate login method, select
User can login at device if card is not available
.
5.
To configure each feature, click the Pencil icon.
6.
To configure the Log Out Confirmation Screen, select an option.
Configuring an Authentication Server for Convenience Authentication
1.
In CentreWare Internet Services, click
Properties
>
Login/Permissions/Accounting
.
2.
Click
Login Methods
.
3.
Set the login method to
Convenience
authentication.
4.
For Convenience Authorization Setup, click the Pencil icon.
5.
For Accounting Code Access, select an option.
6.
Under Server Communication, select an address type. Type the appropriately formatted address or
host name of your server and change the default port number as needed.
7.
For Path, type the HTTP path that your authentication server provides.
8.
When Network Accounting is configured, the printer can obtain user accounting information from
the authentication server. To reduce the number of screens that appear when a user logs in at the
control panel, select
Automatically apply Accounting Codes from the server
.
9.
Click
Save
.
