Xerox Troy PocketPro 100, Руководство оператора

Страница: 17 / 158

Operator Guide
1-1
1 Overview
This chapter provides a functional overview of the entire system,
as well as an overview of the controller and the printer portions of
the system.
Functional overview
The Xerox DocuPrint 100/115/135/155/180 EPS prints high
quality, high resolution monochrome documents in simplex or
duplex mode at high production speeds, from LCDS, PostScript,
PCL, and other data streams. The system can switch between
printing different types of data streams without a need for
rebooting or reconfiguring software.
The printer supports:
• Duplex printing
• Media handling of multiple weights, sizes, and types
• Optional modules for enhanced finishing and output to third-
party finishing devices
• Optional enabling of a third-party roll feeder
• Optional high-capacity feeder/stacker modules, which provide
additional feeder trays and output bins
• High resolution of LCDS, PostScript, and PCL data streams
(shown in the following table)
Table 1-1
Data stream resolution
* Requires additional equipment to enable.
** 600 by 600 dpi input resolution supported for full page IOCA
only
Data
stream
Input resolution
Print resolution:
DP155 and DP180
Print resolution:
DP100, DP115,
and DP135
LCDS 300 by 300 dpi 600 x 2400 dpi 600 by 600 dpi
PostScript
and PCL 300 by 300 dpi or
600 by 600 dpi 600 x 2400 dpi 600 by 600 dpi
IPDS* 240 by 240 dpi* or
300 by 300 dpi or
600 by 600 dpi**
600 x 2400 dpi 600 by 600 dpi