![background image](http://html1.mh-extra.com/html/xerox/phaser-8510/phaser-8510_user-manual_4183218030.webp)
Setting Up the Network
Phaser® 8560MFP/8860MFP Multifunction Printer
2-4
Network Connection
Depending on your particular setup, the following hardware and cabling is required for
Ethernet.
■
If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required.
■
If you are connecting to one or more computers with a hub, an Ethernet hub and two
twisted-pair (category 5/RJ-45) cables are required.
■
If you are connecting to one or more computers using a cable or DSL router, a cable or
DSL router and two or more twisted-pair (category 5/RJ-45) cables are required. (One
cable for each device.)
■
If you are connecting to one or more computers with a hub, connect the computer to the
hub with one cable, and then connect the product to the hub with the second cable.
Connect to any port on the hub except the uplink port.
TCP/IP and EtherTalk are the most common protocols used with Ethernet. To print using a
TCP/IP protocol, each computer and product requires a unique IP address.
See also:
Configuring the Network Address
on page 2-5
Installing the Printer Drivers
on page 2-10
Содержание Phaser 8510
Страница 199: ...Maintenance and Cleaning Phaser 8560MFP 8860MFP Multifunction Printer 8 10 4 Close the side door 8860mfp 059 ...
Страница 206: ...Maintenance and Cleaning Phaser 8560MFP 8860MFP Multifunction Printer 8 17 5 Close the side door 8860mfp 059 ...
Страница 230: ...Clearing Paper Jams Phaser 8560MFP 8860MFP Multifunction Printer 9 7 c Close the front cover 8860mfp 085 ...