Xerox Phaser 6510 Скачать руководство пользователя

Страница: 64 / 236

Paper and Media

Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.

This procedure separates any sheets that are stuck together and reduces the possibility of jams.

Note:

To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to

use it.

Load the paper in the tray. Load hole-punched paper with the holes to the left.

−

For 1-sided printing, load Letterhead or pre-printed paper face up with the top edge going into

the printer.

−

For 2-sided printing, load Letterhead and pre-printed paper face down with the top edge going

into the printer.

Note:

Do not load paper above the maximum fill line on the width guides. Overfilling the tray can

cause the printer to jam.

Xerox

Phaser

6510 Color Printer

User Guide

Содержание Phaser 6510













































































































































































































































Результаты поиска

Содержание Phaser 6510

Отзывы:

Похожие инструкции для Phaser 6510

Бренды по названию

Популярные бренды

Xerox Phaser 6510, Руководство пользователя

Результаты поиска

Содержание Phaser 6510

Отзывы:

Похожие инструкции для Phaser 6510

Бренды по названию

Популярные бренды