Xerox Phaser 6510, Руководство пользователя

Страница: 166 / 236

System Administrator Functions
Configure Settings for PCL 6/5e
Note: Default PCL ® settings are used when a print driver is not selected. Print driver settings override
default PCL ® settings configured from the Embedded Web Server.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click System > PDL Settings .
4. Click PCL 6/5e .
5. Configure the following settings as needed:
− To set the priority mode for print quantity, click Print Quantity Priority , then select an option.
− To set the limit for number of sheets to print, for Print Quantity, type a number.
− To specify the default paper tray, click Paper Tray , then select a paper tray. To allow automatic
tray selection, select
Auto
.
− To specify the default paper size for the default paper tray, click
Paper Size
, then select a paper
size.
− To specify the paper size for the Bypass Tray, click Paper Size (Bypass Tray) , then select a
paper size.
− To select the maximum custom paper size width, for Custom Paper Size Width, type a number.
− To select the maximum custom paper size length, for Custom Paper Size Length, type a
number.
− To set the default output color, click Output Color , then select an option. To allow automatic
color output based on the original document, select
Auto Detect
.
− To set the default printing option for 2-sided printing, click
2-Sided
, then select an option.
− To configure the printer not to print blank pages, for Remove Blank Pages, click the toggle
button.
Note: A check mark on the toggle button indicates that the feature is enabled.
− To set the default page orientation for the original document, click Original Orientation , then
select an option.
− To enable Wide A4 printing, for Wide A4, click the toggle button.
− To set the default pitch size, for Pitch Size, enter a number.
− To set the default output font point size, for Point Size, type a number.
− To set the default output font, click
Font Name
, then select a font.
− To specify the default symbol set for the selected font, click
Symbol Set
, then select an option.
− To set the maximum limit of lines allowed on the page output, for Lines per Page, type a
number.
− To enable Hex Dump, for Hex Dump, click the toggle button.
− To allow the printer to enhance the image automatically, for Image Enhancement, click the
toggle button.
6. To save your settings, click OK .
166 Xerox
®
Phaser
®
6510 Color Printer
User Guide