Xerox Phaser 6510 Скачать руководство пользователя страница 144

Страница: 144 / 236

Troubleshooting

Symptom

Probable Causes

Solutions

Color around the edge of

printing is incorrect.

The color registration is

incorrect.

Adjust the color registration. For details, refer

Color Registration

on page 111.

Stray black dots or white areas

(dropouts).

The paper is outside the

recommended specification

range.

Replace the paper with a recommended size

and type, and confirm that your control panel

and print driver settings are correct. For

details, refer to

Supported Paper

on page 58.

There is debris on the rollers.

Wipe the feed rollers with a clean damp cloth

to remove debris from the rollers.

Note:

Do not touch the transfer roller or the

exposed end of the transfer belt. Fingerprints

can cause print-quality issues.

The toner cartridges are not

Xerox

toner cartridges.

Ensure that the toner cartridges meet

specifications and replace them if necessary.

For details, refer to

Consumables

on page

116.

•

Vertical black or color streaks

or multiple colored streaks or

lines.

•

Streaks in only one color.

The toner cartridges are not

Xerox

toner cartridges.

Ensure that the toner cartridges meet

specifications and replace them if necessary.

For details, refer to

Consumables

on page

116.

Debris in the printer is dragging

against the toner before it is

fused.

Remove any debris or paper scraps from the

paper path under the rear cover.

There is a problem with the

toner cartridge for that color.

Check the toner cartridge for damage and

replace if necessary. For assistance, go to the

Xerox

Support website at

www.xerox.com/office/6510support.

Partial blanks, creased paper, or

blotted printing.

The paper is damp.

Replace the paper.

The paper is outside the

recommended specification

range.

Replace the paper with a recommended size

and type. For details, refer to

Supported Paper

on page 58.

The printer is worn or damaged. For assistance, go to the Xerox

Support

website at

www.xerox.com/office/6510support.

The toner cartridges are not

Xerox

toner cartridges.

Verify that the toner cartridges meet

specifications and replace if necessary.

For

details, refer to

Consumables

on page 116.

The paper is impeded in the

paper path.

•

Remove any paper or debris from the

paper path.

•

Ensure that the trays are pushed in all the

way.

•

Ensure that the rear cover is closed and

locked.

144

Xerox

Phaser

6510 Color Printer

User Guide

Содержание Phaser 6510













































































































































































































































Результаты поиска

Содержание Phaser 6510

Отзывы:

Бренды по названию

Популярные бренды

Xerox Phaser 6510, Руководство пользователя

Результаты поиска

Содержание Phaser 6510

Отзывы:

Бренды по названию

Популярные бренды