Xerox Phaser 6510, Руководство пользователя

Страница: 143 / 236

Troubleshooting
Symptom Probable Causes Solutions
• Page Margins Are
Inconsistent.
• The image is not centered on
the page or the margins are
not consistent.
A paper registration adjustment
is needed.
Use the paper registration procedure to adjust
the image position on the page. For details,
refer to Adjusting Paper Registration on page
111.
Faded printouts with multiple
colors faded.
The toner cartridges are not
Xerox
®
toner cartridges.
Verify that the toner cartridges meet
specifications, and replace them if necessary.
The paper being used is outside
the recommended specification
range.
Replace the paper with a recommended size
and type, and confirm that your control panel
and print driver settings are correct. For
details, refer to Supported Paper on page 58.
The paper type is heavier or
thicker than the paper type
selection.
• Ensure that the proper paper is loaded in
the paper tray.
• Choose a heavier paper type at the control
panel and in the print driver.
• Use a lighter paper or paper type.
The bias transfer voltage is not
properly adjusted for the paper
type.
Verify that the paper types set in the control
panel and the print driver match the paper
loaded in the tray.
The settings in the application
or print driver are incorrect.
Print the Demo Page. For details, refer to
Printing Reports on page 28. If the Demo
Page looks correct, the printer is printing
properly. Verify that the application and the
print driver selections are correct for your print
job.
The paper is damp. Replace the paper.
The high-voltage supply is
defective.
For assistance, go to the Xerox
®
Support
website at
www.xerox.com/office/6510support.
Only one color is faded. Toner cartridge is empty or
damaged.
Check the condition of the toner cartridge and
replace it if necessary.
Xerox
®
Phaser
®
6510 Color Printer 143
User Guide