Xerox Phaser 2135 Скачать руководство пользователя страница 91

Страница: 91 / 153

Phaser 2135 Color Printer

Troubleshooting

Customer Replaceable Consumables (CRCs)

Expended consumables (toner cartridges, imaging drums, fuser, transfer belt) will prevent

printing.

■

Maintain a supply of consumables (especially toner cartridges).

■

Replace consumables when prompted by the printer

Note

Specific instructions for replacing each consumable are included with the

individual replacement packages.

Front Panel Messages

Your printer displays messages on the front panel when operator intervention is required.

The two-line display of the front panel provides information about the condition of the
printer and the suggested or required course of action.

There are two types of messages that require action:

■

Fault

messages appear when the printer stops due to a malfunction, such as a paper

jam. Action must be taken to resolve the fault.

■

Attention

messages do not stop the printer, but warn of action that should be taken to

avert a shutdown.

The following table lists fault and attention messages in alphabetical order, along with an

explanation and corrective action.

Front Panel Messages

Message

Type

Explanation/Corrective Action

Check Tray

[Check Tray 1]
[Check Tray 2]
[Check Tray 3]
[Check Tray 4]
[Check Tray 5]

No Tray Present

Fault

The specified tray is not installed. Make sure the

tray is fully inserted.

Control Panel Error U15
Power Off/On

Fault

An error has been detected with the front panel

interface and communication path. Turn off the

printer, wait 15 seconds, then turn on the printer. If

the problem persists, check the support links at:

www.xerox.com/officeprinting

infoSMART

Engine PU Fan Error U8
Power Off/On

Fault

An error has been detected with a cooling fan. Turn

off the printer, wait 15 seconds, then turn on the

printer. If the problem persists, check the support

links at:

www.xerox.com/officeprinting

infoSMART

Содержание Phaser 2135


























































































































































Результаты поиска

Содержание Phaser 2135

Отзывы:

Похожие инструкции для Phaser 2135

Бренды по названию

Популярные бренды

Xerox Phaser 2135, Руководство по расширенным функциям и устранению неисправностей

Результаты поиска

Содержание Phaser 2135

Отзывы:

Похожие инструкции для Phaser 2135

Бренды по названию

Популярные бренды