Advanced Features and Troubleshooting Manual
75
Adjusting Color Density and Balance
Color Density Adjustment
1.
Identify the square where the bar and background patterns blend together. If this
square is the Current (0) square, no adjustment is needed. Continue to
Exiting the
Menu
.
2.
Press
Item Up
or
Item Down
(labeled 2 and 6) until you see:
3.
Press
Value Up
or
Value Down
(labeled 3 and 7) until he
Value
is equal to the number
of the square identified in step 1:
4.
Press
Enter
(labeled 4). The Color Adjust Page prints showing you the changes that
resulted from the previous steps and the front panel displays:
5.
Repeat Steps 3 and 4 above until the bar and background patterns in the Current (0)
square blend together.
Adjustment Recovery
While in the color adjustment routine you can choose to return the values to the factory
default values by using the Color Adjust menu’s Color Defaults item.
The printer will be restored to the factory default values.
Exiting the Menu
Using the item keys (labeled 2 and 6), scroll to "Exit and Accept Changes", use the
Value
Keys (labeled 3 and 7) to scroll to Yes. If you press the On-line Key or a Menu key (labeled
1 or 5), while you are in the
Color Adjust menu
, you automatically go to this Menu item.
You must then use the
Value
keys (labeled 3 and 7) to scroll to "Yes" and press the
Enter
(labeled 4) key to save and exit.
Note
Once you have made an adjustment, you cannot undo the changes. You can
return the values to the factory defaults.
Color Adjust Menu
Color Density
Color Density =
New Value
Color Adjust Menu
Color Density
Содержание Phaser 2135
Страница 2: ...Phaser 2135 Color Printer Advanced Features and Troubleshooting Manual March 2001 ...
Страница 153: ......