Xerox Phaser 2135, Руководство по расширенным функциям и устранению неисправностей, Страница: 103 / 153

90 Phaser 2135 Color Printer
Troubleshooting
U0-Engine ROM Error Fault During the printer’s self-diagnostics there was a
problem reading the engine ROM. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting / infoSMART .
U1-Engine RAM Error Fault During the printer’s self-diagnostics there was a
problem reading the engine RAM. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting / infoSMART .
U2-Engine EPROM Error Fault During the printer’s self-diagnostics there was a
problem reading the engine EPROM. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting / infoSMART .
U3-Engine EPROM Missing Fault During the printer’s self-diagnostics there was a
problem detecting the engine EPROM. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting / infoSMART .
U4-Engine SRAM Error Fault During the printer’s self-diagnostics there was a
problem reading the engine SRAM. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting
/
infoSMART
.
U5-Engine Control Error Fault During the printer’s self-diagnostics there was a
problem with the internal control logic. Turn off
the printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the support
links at:
www.xerox.com/officeprinting / infoSMART .
U6-Power Supply Error Fault During the printer’s self-diagnostics it was
detected that the power supply voltage is
irregularly high. Turn off the printer, wait 15
seconds, then turn on the printer. If the problem
persists, check the support links at:
www.xerox.com/officeprinting / infoSMART .
U7-Feeder Home Error Fault An error has been detected with the home position
of the front paper feeder. Turn off the printer, wait
15 seconds, then turn on the printer. If the
problem persists, check the support links at:
www.xerox.com/officeprinting / infoSMART .
Printer Management Status Messages (cont'd.)