Xerox MF Series, Техническая документация

Страница: 24 / 191

IG 252 787 467 - A - 4 -
1.2 E
LECTRICAL REQUIREMENTS
1.2.1 M
AINS
Single-phase AC supply with earth, in conformance with the information on the label on the back of
your fax.
Note(s) :
- The machine cannot be connected to an IT type power supply.
- The mains input of the machine conforms to the overvoltage safety level.
1.2.2 T
ELEPHONE LINE
The telephone line is equipped with a standardized telephone connector and should be connected to the
switched telephone network (private exchange (PABX) or public exchange).
Note(s) : The telephone line input conforms to the TNV-3 safety level.
1.3 E
NVIRONMENTAL CONDITIONS
When selecting a location for the machine, the following points should be taken into account:
• The telephone socket should be located at no more than 2 meters.
• A standard single-phase mains socket with earth (rated in conformance with the information on
the label on the back of the fax) should be located at no more than 2 meters.
• For easy access to the machine, leave a space of about 10 cm. at the sides and the back. Also
leave sufficient space in front of the machine.
• Do not install the machine in direct sunlight, near heating radiators or near air conditioning out-
lets (see §2.1 of the Technical Description).
• The room should be adequately ventilated.
• Avoid locations where frequent vibrations occur.
• Avoid locations where water or other products might be splashed on the machine.
• The machine should not be installed directly on the floor.
• Place the machine on a flat horizontal support.
2. UNPACKING
• Fax / printer terminal
• Initialization smart card
• Document output tray
• Printer output tray
• Printer paper feed tray
• Mains lead
• Telephone lead
• Document loading tray
• UG (User Guide)