Xerox MF Series, Техническая документация

Страница: 52 / 191

MG 252 787 467 - A - 4 -
• Open the control panel/scanner by actuating the opening lever located on the left of the fax.
Attention - The opening is limited to approx. 60° by stops: do not try to force the panel any further.
Wipe the elements of the paper separator module with a lint-free cloth soaked with isopropyl alcohol.
Recommended interval : 2 to 6 months, depending on utilization.
1.1.3 CIS
WINDOW
See illustration in § 1.1.1
• Set the on/off switch to “O” (off).
• Open the control panel/scanner by actuating the opening lever located on the left of the fax.
Attention - The opening is limited to approx. 60° by stops: do not try to force the panel any further.
• Wipe the scanner window with a lint-free cloth moistened with isopropyl alcohol, or with anti-
static paper tissues as used for cleaning optical glass.
Recommended interval : to be defined depending on utilization. After cleaning, is advised to make a
local copy to check the cleanliness of the window.
1.1.4 C
ONTROL PANEL KEYS AND COVERS
1.1.4.1 Cleaning the control panel keys
• Set the on/off switch to “O” (off).
• Clean the top of the control panel and the keys with a lint-free cloth moistened with isopropyl
alcohol or by means of a spray-on cleaning product. Let the product act for a few moments
before wiping it off.
Recommended interval : to be defined depending on utilization .
1.1.4.2 Cleaning the covers
It is advisable to clean all covers during a maintenance visit.
1.2 S
CANNING AND COMMUNICATION ERROR CODES
Communication error codes
The communication error codes appear in the logs and in the transmission reports.
1.2.1 G
ENERAL CODES
Code 01 - Engaged or no fax tone
This code appears after 6 failed attempts. You will have to restart the transmission at a later time.
Control panel
Opening lever