Xerox MF Series, Техническая документация

Страница: 39 / 191

- 19 - IG 252 787 467 - A
7.4 S
OFTWARE
D
OWNLOAD
Three methods can be used to update the machine software:
• by means of a link to a PC,
• by means of an STN (switched telephone network) connection,
• by means of a local network.
The main software (that runs on the CPU board), the boot software and the PCL/SG Script font files
can be downloaded independently.
7.4.1 D
OWNLOAD VIA
PC L
INK
This procedure requires a basic PC running under Windows with the TLCUSB2.exe executable and a
USB cable.
• With the machine in an inactive state, disconnect the phone plug so as not to receive any
incoming calls. Make sure that all documents in the printer memory have been printed. It is
preferable that there are no send commands queued and that the Internet provider selection has
been set to
None ( MENU 9 1 ) : this may affect the programming of the modem software, but
should not result in a download failure.
• Connect a PC using the USB cable. Switch the machine to PC download mode (key sequence
MENU * 4 ), after setting bit 1 of SOS 8 to 1 (1xxxxxxx). Launch the executable and select the
binary file to be downloaded.
• After a few seconds, a window opens stating that the download was successful. The machine
should not reboot immediately. If this occurs, either the file is corrupted (wrong checksum) or
the software is not compatible with the fax machine. Then the machine reboots with the
software that was already installed. Check the file and restart from step 2.
• After approximatly 40 seconds, the machine switches itself off, then switches on again. The
PLEASE WAIT message is displayed.
• Check the main software version and the checksum of the PCU soft by typing MENU * V , and
check the software version and the checksum of the boot software by typing MENU * B or soft
modem MENU * M.
• Reconnect the phone plug.
7.4.2 D
OWNLOAD VIA
STN
This requires a Quadrige (any version), the only equipment that can transmit software to the fax in a
special mode referred to as
transparent . The MFL must be connected to a phone socket with a known
phone number. The data rate is less than or equal to 14400 bauds.
• Make sure that all documents in the printer memory have been printed. It is preferable that there
are no send commands queued and that the Internet provider selection has been set to None (key
sequence MENU 9, 1, 1 ): this may affect the programming of the modem software, but should
not result in a download failure.
Set up the machine in STN download mode (key sequence
MENU, *, 3 ). There is no confirma-
tion and an alarm sounds (indicating that a special key sequence has been entered).
• On the Quadrige, set up a transmission in Express mode of the binary file that contains the
software and start it. To do so:
- Click on the < Envelope > icon: this opens the Express mode window;
- Find the binary file in the appropriate directory and click on < Valider > (validate);
- Enter the phone number of the fax to be downloaded in the first destinataire (addressee)
field;