Xerox MAX 200 Скачать руководство пользователя страница 26

Страница: 26 / 284

Getting to know the MAX 200

Scanner control panel (continued)

Meter check button

Note: The meter check screen displays two fields, billing and
service. The service field is for the service representative.

Introduction

The

meter check button

provides access to the billing meter. The

meter displays the printer media usage.

The machine serial number is also displayed on the meter check
screen. It is located at the lower right corner of the screen.

Procedure

1. Press

the

press to open

latch, at the upper right corner of the

scanner control panel cover.

The scanner control panel cover is open.

2. Press

the

meter check

button

The meter check indicator lamp is lit and the meter check screen
is displayed.

The billing field displays the media usage.

3. To exit, press the

meter check

button

The

basic feature group screen

is displayed.

Custom presets button

Note: For detailed information on how to enter the custom presets
feature, refer to page 174.

Introduction

The

custom presets button

provides access to various default

settings. There are three feature groups; system, copy and
storage/disk manager.

Procedure

1. Press

the

press to open latch

, at the upper right corner of the

scanner control panel cover.

The scanner control panel cover is open.

2. Ensure the machine is in copy mode. If needed, refer to page

277.

3. Press

the

custom presets

button

The custom presets indicator lamp is lit and the system features
tab is displayed.

4. Select the desired feature tab.

5. To exit, press the

custom presets

button

Содержание MAX 200





























































































































































































































































































Результаты поиска

Содержание MAX 200

Отзывы:

Похожие инструкции для MAX 200

Бренды по названию

Популярные бренды

Xerox MAX 200, Руководство пользователя

Результаты поиска

Содержание MAX 200

Отзывы:

Похожие инструкции для MAX 200

Бренды по названию

Популярные бренды