Xerox DocuPrint N3225, Руководство системного администратора

Страница: 131 / 325

Using the Finisher
Chapter 1: Configuring the Printer
❖
1-123
Using the Finisher
Features The finisher option can be installed only on console
versions of the printer (i.e., versions which have the 2,500
Sheet Feeder). It has three output bins with a total
maximum capacity of 2,000 unstapled sheets, up to 667
unstapled sheets per bin. Stapled output can be sent to all
three bins.
Built-in Stapler
The stapler can staple sets of up to 50 sheets. It has three
stapling modes (Front for portrait, Back for landscape, and
Dual for booklet mode). The customer-replaceable
stapling unit contains 5,000 staples which are packaged as
a supply item, in sets of three, for a total of 15,000 staples
per package. The finisher comes with one staple cartridge
of 5,000 staples.
Capacity Handling
The finisher is programmed to ensure that there is enough
space remaining in the bin to output a job of from two to
50 pages. Up to 50 sheets can be stapled.
Stapled sets are kept in a compiler bin and ejected once a
complete set has been stapled. Output is delivered to the
finisher bins face down only.
Because it uses the same connector and occupies the same
location as the Mailbox, the same printer can not support both
a Finisher and a Mailbox simultaneously.