Xerox DocuPrint N3225, Руководство системного администратора

Страница: 51 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-43
Output Dest
Set the default paper output
destination. The available values are:
Face Down Bin*
Face Up Bin
Mailbox 1 - Mailbox 10
Sorter
Mailbox bins 1 through 10 are
only available when the optional
10-bin Mailbox/Collator is
installed.
For more information on printing to
the Mailbox/Collator, see
“Using the
10-bin Mailbox/Collator” (page 2-29).
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item
Down
until you see:
System Menu
Output Dest
3. Press Value Up or Value
Down
until you see:
O u t p u t D e s t =
New Value
4. Press Enter . You will see:
System Menu
Output Dest
5. Press On Line . You will see:
Ready
Staple Mode
Set the default staple position.
The available values are:
Off*
Position 1 (Front)
Position 2 (Rear)
Dual (Two in middle)
This item appears only when the
Finisher is installed.
1. Press
Menu Up
or
Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item
Down until you see:
System Menu
Staple Mode
3. Press
Value Up
or
Value
Down until you see:
Staple Mode =
New Value
4. Press
Enter
. You will see:
Staple Mode
Output Dest
5. Press On Line . You will see:
Ready
Table 1.14 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.14 Page 8 of 11