Xerox DocuPrint N3225, Руководство системного администратора

Страница: 64 / 325

Using the Menu System
1-56
❖
System Administrator Guide
Table 1.20 USB Menu Functions
Menu Item and Function Keystrokes Display
Port Enable
Enable or disable the USB port.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
USB Menu
2. Press Item Up or Item
Down
until you see:
USB Menu
Port Enable
3. Press Value Up or Value
Down
until you see:
Port Enable =
New Value
4. Press Enter . You will see:
USB Menu
Port Enable
5. Press On Line . You will see:
Ready
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds ( 30* )
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either
Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
1. Press Menu Up or Menu
Down
until you see:
Menus
USB Menu
2. Press Item Up or Item
Down until you see:
USB Menu
Port Timeout
3. Press Value Up or Value
Down
until you see:
Port Timeout =
New Value
4. Press Enter . You will see:
USB Menu
Port Timeout
5. Press On Line . You will see:
Ready
Table 1.20 Page 1 of 2