Xerox DocuPrint N3225, Руководство системного администратора

Страница: 76 / 325

Using the Menu System
1-68
❖
System Administrator Guide
IP Address
Set the four byte IP address. The
available values are:
xxx.xxx.xxx.xxx
Where xxx = 000 to 255
.
This item only appears if IP Address
Res. is set to
Static
.
For this item (after Step 3), Item
Up
moves the cursor to the right
through the displayed IP address and
Item Down moves the cursor to
the left. This allows you to change
characters within the string rather
than having to re-enter the entire
string.
With the cursor displayed under a
character,
Value Up increments
the value of that character and Value
Down decrements the value.
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item
Down
until you see:
Ethernet Menu
IP Address
3. Press Value Up or Value
Down
. You will see:
I P A d d r e s s =
xxx.xxx.xxx.xxx
4. Press Value Up or Value
Down to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up or Value Down
causes continuous scrolling
through the values.
I P A d d r e s s =
xxx.xxx.xxx.xxx
5. To change other characters in
the IP address, press
Item
Up or Item Down to
scroll right or left respectively
through the character string,
then press
Value Up or
Value Down to change the
value of the character above
the cursor (as in Step 4).
I P A d d r e s s =
xxx.xxx.xxx.xxx
6. When you have completed
setting the IP address, press
Enter
. You will see:
Ethernet Menu
IP Address
7. Press On Line . You will see:
Ready
Table 1.22 Ethernet Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.22 Page 9 of 12