Xerox DocuPrint N3225, Руководство системного администратора

Страница: 218 / 325

Control Panel Messages
5-26
❖
System Administrator Guide
Remove Output
From Mailbox 9
The Mailbox 9 output bin is full. Printing cannot continue. Remove the
output from the Mailbox 9 output bin.
Remove Output
From Mailbox 10
The Mailbox 10 output bin is full. Printing cannot continue. Remove the
output from the Mailbox 10 output bin.
Replace Print
Cartridge
The Laser Print Cartridge has reached its end of life. Printing cannot resume.
Replace the cartridge. See
“Replacing the Laser Print Cartridge”
(page 4-2).
Reset ENV/Bypass
A jam may have occurred in the Envelope Feeder or Bypass Feeder. Reset the
Envelope Feeder or Bypass Feeder.
Reset Trays 2,3
A jam may have occurred in the Trays 2 and/or 3.
ACTION: Reset the trays.
ROS Trouble
Power Off/On
This message indicates there is a problem with the ROS controlling ASIC.
Power OFF the printer and power it ON again. If the message appears again,
contact your Customer Support Center.
Slide In
Finisher
The Finisher guide rail is not entirely in position. Slide the guide rail into
position. Make sure it is securely snapped into the console. Check to see that
the thumb screw that connects it to the Finisher is hand tightened.
SNMP Resetting
SNMP MIB data base is being re-initialized. Please wait.
Stapl Fail
Staple Failure. Power OFF and ON the printer.
Stapl Fail H5-91
Power Off/On
The Staple Head did not return to its initial position. Power OFF and ON the
printer.
Table 5.2 Control Panel messages and corrective actions (continued)
Message Description/Corrective Action
Table 5.2 Page 22 of 24