Xerox DocuPrint C525 A, Краткое руководство пользователя

Страница: 14 / 49

14
1 Installing the Printer
Connecting the Power
Cord to Switch On the
Printer
You can load the paper or install the toner
cartridge and drum cartridge into this printer while
the printer is switched on.
When connecting the power cord, keep in mind
the warning and caution items stated in “For
Power & Earth Connection” (P. 9).
1. Connect the power cord to the power cord
connector at the back of the printer.
2. Connect the other end of the power cord to
the power outlet.
3. Press the power switch of the printer to the
<|> position.
The toner cartridge carrier rotates and then
stops. The “Load XXXX (the color of the
toner) Cartridge” message is displayed on
the control panel.
Installing the Toner
Cartridge
WARNING
• Never throw a toner cartridge into an open
flame. It can cause an explosion and you can
get burnt.
Important
• Although the toner is not harmful to your body, wash it
off immediately if your hands or clothes are stained with
it.
1. After confirming the “Load XXXX (the color of
the toner) Cartridge” message on the control
panel, open the front cover.
2. Hold the tape and gently pull it forward to
remove the protective cover.
Note
• The protective cover is attached to each toner cartridge
slot during at the factory. You only have to remove the
cover from each toner cartridge slot the first time that
you install the toner.