Xerox DocuPrint C525 A, Краткое руководство пользователя

Страница: 13 / 49

Installing the Optional Accessories
13
IE
IE
Installing the Additional Memory
There are three types of additional memory for this
printer, 128 MB, 256 MB and 512 MB. When an
additional memory is installed, the total memory
capacity becomes 192/320/576 MB respectively.
Important
• Do not touch the terminal area of the additional memory.
• Do not bend or damage the additional memory.
• Be sure to touch a metal surface to eliminate static
electricity before touching the additional memory with
your bare hands.
• To add more memory when the printer is in use, you
need to configure the memory capacity in the print
driver. For details, refer to the Online Help for the print
driver.
1. Pull the cover on the left side of the printer
forward by hooking your finger on the notch
to remove the cover.
2. Hold the additional memory so the notch is
aligned with the protrusion on the slot, and
insert the additional memory into the slot
firmly.
Note
• Insert the additional memory firmly by pushing it from
the top.
When you install a network expansion card,
skip the next step and proceed to step 2 in the
next section “Installing the Network
Expansion Card” (P. 13).
3. Reattach the cover on the left side of the
printer to the printer.
Installing the Network Expansion
Card
1. Pull the cover on the left side of the printer
forward by hooking your finger on the notch
to remove the cover.
2. Hold the network expansion card so its
connector is toward the connector of the
printer, and insert the connector into the slot
on the left side of the printer.
Note
• Insert the network expansion card firmly by pushing it
from the top.
3. Tighten the two screws supplied with the
network expansion card on the back side of
the printer.
4. Reattach the cover on the left side of the
printer to the printer.