Xerox DocuPrint 240A, Руководство пользователя, Страница: 90 / 165

90
4 Settings on the Control Panel
PaperSelect Mode
Specifies how to select paper when printing PostScript data.
[Auto] (default)
Select this mode when you want to use our PostScript driver. Selecting this will print on the
paper loaded in the tray specified by the printer driver.
[Select from tray]
Some applications create the PostScript program directly without using a printer driver. In
this case, a paper tray may not be selected correctly depending on the application.
Selecting [Select from tray] ensures that data is printed on the specified paper.
DefaultPaperSize
Specifies the default setting of the paper size when using E-mail printing feature, the paper
size when printing the reports, and the [Output Size] setting of the each print mode to [A4]
or [8.5×11"]. The default is [A4].
Allocate Memory
*3 (refer to P. 94)
[Allocate Memory] menu is used to change the capacity of the memory for each interface
and the form memory.
In this printer, you can change the following memory allocation.
: Available
: Not
available
: Not available when the hard disk (optional) is installed.
PS: PostScript software kit (optional)
Important
• Changing the memory capacity will reset the memory and delete all data stored in each memory area.
• You cannot exceed the overall memory capacity during memory allocation. If the setting value exceeds
the actual memory capacity, the system will automatically adjust it at power on.
• If the memory is running out when the port is set to [Enable], the port may be disabled automatically. In
this case, you need to disable the port(s) you are not using or change the memory allocation. However,
the parallel and USB ports will not stop automatically.
Note
• The memory allocation settings (except the print page buffer setting) are available in the control panel
and CentreWare Internet Services.
• The print page buffer is the area in which the actual print image can be drawn. The print page buffer is
allocated to the remaining area after the memory is allocated to all other uses. Therefore, you cannot
directly change the print page buffer capacity. You can check the actual print page buffer size in [System
Settings List]. You can also check it in CentreWare Internet Services. When you want to print a high
resolution document, allocate memory so that the print page buffer size is large.
Memory types Standard PS
PS memory
HPGL auto layout memory
Receive buffer size
Print page buffer