Xerox DocuPrint 240A, Руководство пользователя, Страница: 86 / 165

86
4 Settings on the Control Panel
Sleep Mode
The Sleep mode is a feature that reduces the printer’s power consumption more effectively
than Low Power mode. This item specifies whether to use this feature. The default is
[Enable].
Note
• If [Disable] is set for [Low Power Mode], you cannot set [Disable] for [Sleep Mode].
Refer to
• “Example: Changing the Low Power/Sleep Mode Settings” (P. 66)
Sleep Mode Timer
*3 (refer to P. 94)
Specify the transitional time to Sleep mode between 5 and 30 minutes in increments of 1
minute. Once the power saver mode is turned on, the display of the control panel is turned
off and the lamp of the <Power Saver> button is lit. The default is [10 Mins].
Refer to
• “Example: Changing the Low Power/Sleep Mode Settings” (P. 66)
Auto Job History
Specifies whether to automatically print information about the printed data that has been
processed in the printer ( [Job History Report] ).
[Do not print] (default)
Select this if you do not want to print the [Job History Report] automatically.
[Print]
Select this to print a report on the oldest 50 data histories that have not been output yet
when the memory capacity is full. This does not include the print data in processing or in
queue.
2 Sided Report
Specifies whether to print reports/lists on 1 side or 2 sides of the paper when the 2 sided
printing function is available.
[1 Sided] (default)
[2 Sided]
Print Area
Specfies whether to expand the printable area. The default is [Normal].
Banner Sheet
„
Banner Output
Specifies whether to output the banner sheet. If you want to output it, specify whether to
output it at the beginning of, at the end of, or at the beginning and end of the document.
„
Banner Tray
Specifies the tray from which the banner sheet is output from trays 1 to 4.