Xerox DocuPrint 240A, Руководство пользователя, Страница: 20 / 165

20
1 Basic Operations
1.5 Displaying Optional Accessory
Configuration and Paper Tray Settings
When using this printer as a network printer and having enabled SNMP protocol, you can
display on the printer driver, the optional accessory configuration and settings configured at
the control panel such as paper type or size. These settings are displayed on the [Options]
tab. This section explains the procedure using Windows XP as an example.
Important
• When using this printer as a local printer, this feature cannot be used. You have to manually set the
items on the printer driver.
• The rear tray information cannot be obtained. You have to manually set the item.
• For paper size and paper type settings, you must configure them at the control panel beforehand. Even
if you change the settings here, they will not be reflected on the printer itself.
Note
• When using this feature, you have to activate the SNMP port (default: [Enable]) on the printer using the
control panel.
• For Windows NT 4. 0/Windows 2000/Windows XP/Windows Server 2003, only users with
administrator’s rights can change the settings. Users without administrator’s rights can only check the
contents.
1. From the [Start] menu, click [Printers and Faxes] and then display the properties of the
printer to be used.
2. Click the [Options] tab.
3. Click [Get Information from Printer].
The properties of the printer can be displayed on the printer driver.
4. Click [OK]. The contents of the [Options] tab will be updated based on the data
obtained from the printer.
Note
• The automatically detected paper size and orientation will be displayed as the paper size and orientation
of [Paper Tray Attributes].
• The paper type set on the control panel will be displayed as the paper type setting of [Paper Tray
Attributes].
3
4