Xerox DocuPrint 180, Руководство по настройке

Страница: 90 / 276

STARTING AND STOPPING THE SYSTEM
3-26 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Start
The Start command starts printing, queueing, or both.
Access Administrator or operator
Syntax Start <printing | queueing | all>
Arguments <printing>
Enables the printing of jobs.
<queueing>
Allows the Printer Controller to receive jobs from clients.
<all>
Starts both printing and queueing.
Example The following example starts both printing and queueing:
Restarting the sequencer and the system
If your printer is unresponsive, use the Restart Sequencer or Restart
System commands. Use the Restart Sequencer command before
using the Restart System command because the Restart Sequencer
command restarts the system sequencer without restarting the entire
system.
Restart Sequencer
Use the Restart Sequencer command to restart the system
sequencer without restarting the entire system. This command
aborts jobs currently being processed. Depending on the value of the
“sequencer.attempts” in your configuration, you may need to repeat
the command to change the job status to “Held.”
Access Administrator or operator
Syntax Restart Sequencer <restart option>
Argument <restart option>
To terminate the Sequencer before the restart, specify “kill.”
PS-op>
start all
Queueing Started.
Printing Started.