Xerox DocuPrint 180, Руководство по настройке, Страница: 30 / 276

USING THE SYSTEM INTERFACE
1-2 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Listing commands and options After you have accessed the appropriate level, you can use the
DocuPrint Print Service window to enter the commands. For all
commands:
•
You can enter ? at the prompt to display all available
commands.
•
You can enter ? at any point in a command for more
information.
Command shortcuts You need not enter a command in full—only enough to distinguish it
from other commands. For example, you can enter
li doc for the List
Documents command. After typing enough characters to make a
command word unique, use the space bar to complete the word.
After typing enough characters to make a command unique, use the
<RETURN> key to execute the command.
Including arguments Some commands have required or optional arguments. You can
enter arguments on the same line as the command. For required
arguments, the system will prompt you for the value of each
argument if you do not enter it on the command line.
Canceling commands You can terminate most commands by simultaneously pressing
<CONTROL> and <C>.
Change Administrator Password
Use the Change Administrator Password command to change the
password used to access the administrator level of commands.
Access level Administrator
Syntax Change Administrator Password
Arguments None. The system prompts you to enter the old, and then a new,
Administrator password. The password is not case-sensitive.
Change Operator Password
Use the Change Operator Password command to change the
password used to access the operator level of commands. The
password is not case-sensitive.
Access level Administrator
Syntax Change Operator Password
Arguments None. The system prompts you to enter the old, and then a new,
Operator password. The password is not case-sensitive.