Xerox DocuPrint 180, Руководство по настройке

Страница: 228 / 276

MANAGING FONTS
10-8 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Example Printing one copy of a sample of 256 12-point Helvetica characters
(PostScript font):
Print PCLFont Sample
Use the Print PCLFont Sample command to print samples of the PCL
fonts installed on the Printer Controller.
Example Printing one copy of a sample PCL font:
PS-op>
print font sample helv* 12 256 1
Print Fonts Sample xerox/ps/helv* at November 26,
1999 2:03:49 pm PDT
submitted as document number 651
Access level Administrator or operator
Syntax Print PCLFont Sample <name> <SymSet> <Height>
<NumChars> <Copies>
Argument <name>
Specifies the name of the font.
<symSet>
Specifies the symbol set of the font (for example, 8U). You can
also enter “default” to specify the default symbol set.
<height>
Specifies the size of characters to print, between 6.0 and 24.0.
For bitmap fonts, the height entry is ignored, and the correct
height of the bitmap font is printed.
<numChars>
Specifies the number of characters to print (“128” or “256”).
<copies>
Specifies how many copies of the sample you want to print.
PS-op>
print pclfont sample
Enter a short name for the font:
E13B
Enter the SymSet:
0U
Enter the height [0.0 ..24.0]:
9.0
Number of Characters (128 or 256):
256
Enter the number of copies to print:
1
Print PCLFontSample xerox/pcl/E13B at July 8, 1999
10:08:38 am PDT
submitted as document number 65