Xerox DocuPrint 180, Руководство по настройке

Страница: 156 / 276

SETTING SYSTEM DEFAULTS
5-22 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Show PCL Imager Parameters
Use the Show PCL Imager Parameters command to display the
values of the PCL imager parameters.
Access level Administrator
Syntax Show PCL Imager Parameters
Arguments None
Example This example shows the results of the Show PCL Imager Parameters
command:
Change PCL Imager Parameters
Use the Change PCL Imager Parameters command to change the
values of the imager parameters for PCL only.
Access level Administrator
Syntax Change PCL Imager Parameters
Arguments None. The system prompts you for the value of each parameter as
follows:
Resolution
For the 96, 4635, 180 printer models only, enter the dpi value
300 or 600 at the prompt.
Raster Graphics enhancement value
Indicates whether you want thickening for raster graphics.
Acceptable values are “TRUE” or “FALSE”.
Built-in pattern enhancement value
Indicates whether you want thickening for patterns. Acceptable
values are “TRUE” or “FALSE”.
HPGL minimum stroke enhancement value
Indicates whether you want to thicken the minimum stroke for
HPGL. The value must be a positive integer (from 0 to 255). “0”
and “1” indicate that no enhancement is required. Other integers
indicate the desired width of the stroke in pixels.
PS-admin>
show pcl imager parameters
PCL 5e
Enhance Graphics: FALSE
Enhance Built-in Pattern: FALSE
Enhance Strokes: 0
Enhance User-defined pattern: 0
Enhance Bitmap Font: FALSE